Feature: Especially for Inch/Imperial users more choices for measured value (e.g. inch + cm on the same line)

[iOne iTwo]

For dimensions there's a "measured value":

Capture.JPG (7.91 KiB) Viewed 2307 times

I would like to be able to set at least two units for that measured value, e.g.:

• Measured value display type one: inch
• Measured value display type two: cm

So a resulting visible label of:

<-------------------- 16" (40.64 cm) +- ----------------->

Regardless of the units of the drawing itself.

What I find myself doing is manually overriding the "measured value" to do the same thing, with the danger that it becomes inaccurate.
A check function for accuracy of the measured value vs. display value seems too fragile to suggest.

[Husky]

What I find myself doing is manually overriding the "measured value" to do the same thing, with the danger that it becomes inaccurate..

Hi, may I ask you for what do you need those imperial/metric dims?

[iOne iTwo]

Hi, may I ask you for what do you need those imperial/metric dims?

I prepare plans and specifications for a product sold internationally. Thus dimensions in both systems are critical,
and need to be correlated and correct. Which means formatting them both for the native audience without making mistakes.

[Husky]

In other words, none of your customers need two different Units, right?
Why not convert the drawing according to the recipient customer? Or provide different sets of the drawing for each unit. Anything else is just confusing and not standard practice!

[HJ Seef]

Imperial is old skool measurement from the dark ages. Since 1975 the NIST recommends for international trade the metric International Standard (System Internationale) in mm.

[Husky]

Yes, I am aware of that. Now imagine if everyone had started phasing out the imperial system 50 years ago and no one had tried to find a way to keep it alive through the back door, then—and only then—would we have succeeded in eradicating this

Imperial is old skool measurement from the dark ages.

.Back to the question: What would you like to see changed in the dimensions?

[CVH]

What would you like to see changed in the dimensions?

I would like to be able to set at least two units for that measured value

QCAD does not support alternative readouts.
Not all common and all possible Dimension features are fully implemented.
Not everything mimics other applications.
The list of open requests contains various nice proposals and many are supported by the DXF standard.
I think that 'Keep it simple' is the corner stone here.

It is highly likely that it will not be implemented.
2 drawings in different units is certainly an option and the most clear one.

Converted and rounded it may not be the same.
1/4" (6mm) is not correct in my book.
Good enough for a customer, incorrect for a workshop.
Perhaps a bit too simplistic example. It is the general idea that counts.

A custom script could automatically adapt the labels in a post-process.
Note that a longer label also needs more place and this without user interaction.
That can even re-run on any Dimension entity change with a listener.
(e.g.: Centroids, Selection Groups)

The question here is:

• How demanded is this feature?

Regards,
CVH